Xiaomi now sells smartphones and other consumer electronics. Many people may be seeking a great gift for friends and families now. Check GearBest’s Xiaomi Best Deals, Save up to 60% Now! Check the secret discount link!
These are the instructions to Flash Xiaomi Firmware (Stock Rom) using Xiaomi Mi Flash Tool on Windows PC. Requirements: Your Xiaomi Mobile Phone should have at-least 50-70 percent of phone battery to perform the flashing process.
How to Use Xiaomi MI Flash Tool
Step 1: Download and extract the Xiaomi Mi Flash Tool on your PC.
Step 2: Download Xiaomi Firmware For All Models skip this method if you already have Stock Rom for Xiaomi. after installed Flash file extract it on your computer.
Step 3: Download and install Xiaomi USB Drivers on your PC. Skip this method If you have already installed the Xiaomi USB Drivers.
Step 4: Now, Start the Setup File to install Xiaomi Mi Flash Tool on your PC.
Step 5: SWITCH OFF your Xiaomi Device.
Step 6: You need to boot your Xiaomi Mobile Phone into the Download Mode (Fastboot mode). If you want To boot into the download mode: Press and Hold Power + Volume Down button for 9-10 seconds.
Step 7: Now, its time to Connect your Xiaomi Device to the PC using the Original USB cable.
Step 8: Open start menu and start Xiaomi Mi Flash Tool .
Step 9: After launch , Press on the Button and Select the Firmware Folder.
Step 10: Now, Click to start the Flashing Process.
Step 11: Once your flashing process is completed, you will be able to see the Success Message in Xiaomi Flash Tool.
Step 12: Once Flashing process is completed, disconnect your device from the computer and Turn it ON.
The Most Popular Xiaomi Models on Sale:
Premium Ultrabooks or Notebooks